How to Get That Vintage Typewriter Vibe with a Foil Stamping Machine: A Creative Guide Using the Maxita EC-27 and Type 1 Holder
Ever wanted to print a full sentence in gold foil that looks like it came straight off a vintage typewriter? The kind of quiet detail that instantly adds character to a card, a thank-you note, or a custom gift tag?
Yeah, us too.
That’s why we decided to try something a little different—using the Maxita EC-27 hot foil stamping machine, paired with its Type 1 Holder, to press out the words "For your next masterpiece" onto heavyweight card stock. And spoiler: the result was clean, tactile, and just the right amount of nostalgic. Here’s how we pulled it off, and how you can too.
Why This Combo Works: The Maxita EC-27 + Type 1 Holder
Let’s break it down. The EC-27 isn’t your average tabletop foil machine. It’s built like a tank (in the best way)—with a solid aluminum body, steel base, and precision Omron temperature control that gives you consistent heat every single time. No guesswork, no burnouts.
But the real star of this project? The Type 1 Holder. This one comes with a steel bar that lets you lock in individual letter stamps in a straight line—adjust the spacing, mix and match fonts, align it all neatly. It's basically your layout playground. If you’ve ever struggled to line up more than five letters at once, you know how rare (and helpful) that is.
Tools & Materials You’ll Need
-
Maxita EC-27 hot foil stamping machine
-
Maxita Type 1 holder with steel bar
-
Metal letter stamps (we recommend serif or monospaced styles for that typewriter look)
-
Heat foil (gold, silver, matte black all work great)
-
Heavy card stock (ivory board, kraft card, recycled textured paper, etc.)
-
A bit of masking tape and scrap paper for test runs
Step-by-Step: Recreating That Typewriter Feel in Foil
1. Layout Your Phrase
Using the steel bar, slide and fix your individual stamps into place. We used "For your next masterpiece". Keep your spacing slightly wide if you want that old-school typewriter vibe—remember, imperfections are the charm.
2. Temperature Matters
Here’s where the magic happens. We ran our EC-27 at 161°C, which gave us a nice crisp result: sharp lines, clean edges, just enough bite into the paper. But depending on your card stock, you might want to play with the heat:
-
Higher temps (165–170°C): Gives a subtle burn effect around the letters—looks almost like ink seeped into the paper. Great for an aged look.
-
Lower temps (140–150°C): Results are softer, less defined. Almost like the print’s been faded over time. Really lovely for a weathered, dusty tone.
Moral of the story? Test on scraps first. The charm is in the trial.
3. Align and Press
Place your card on the EC-27's smooth-sliding platform. Line things up using the built-in laser guide (yes, there’s a laser). Fix the card with tape if needed, and press down.
4. Done. Admire. Repeat.
You’ll feel the satisfaction the moment you lift that plate. It’s instant. The shimmer of foil, the light indentation on thick paper—it just feels good.
The Design Possibilities
Here’s the thing. Once you get the hang of this setup, you’ll want to use it everywhere:
-
Thank-you cards with your brand’s tone of voice
-
Foiled quotes or taglines for packaging
-
Holiday cards, artist series, limited runs
-
Even customer name tags or product certificates
Just one line of foil can totally shift how your product feels—more thoughtful, more tactile, more permanent.
So Why Maxita?
Because it’s built for makers who care. The EC-27 gives you professional-level results in a studio-sized machine, with the ease of precise digital controls and a design that’s made to last. And when paired with the Type 1 Holder? You get freedom. You’re not stuck with one stamp. You can build a sentence.
Final Thoughts: It's Not Just Printing—It's Storytelling
There’s something quietly powerful about stamping a sentence instead of just a logo. It’s like whispering a message into your packaging, your card, your brand. Something only those who pause will notice—and remember.
And if you’re into that? We’ve got you.
About CÍ
CÍ is a boutique studio and global store for leathercraft tools. We’re a 100% family-run business with our own factory, and we partner with some of the best independent tool designers around the world. From foil stamping machines to pricking irons, edge bevelers, stitching ponies, skiving tools, and precision knives—we stock the gear we actually use and love.
We offer global shipping (yep, nearly everywhere) and long-term after-sales support. So whether you're crafting one wallet or a hundred, we’re here for it.
References
Omron (2023) Digital Temperature Controllers. [Online] Available at: https://www.ia.omron.com/products/family/3563/ [Accessed 10 Jun 2025].
CÍ Official (2025) Maxita EC-27 Product Description and User Reviews. [Online] Available at: https://ciofficial.com/products/maxita-hot-foil-stamping-embossing-machine-ec-27 [Accessed 10 Jun 2025].
